TM-5-4310-376-14 Compressor Reciprocating Gasoline Engine Driven 15 CFM 175 PSI Model 50-6840 Manual

Chapter 1. INTRODUCTION - TM-5-4310-376-140019
Section II EQUIPMENT DESCRIPTION
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS - TM-5-4310-376-140021
EQUIPMENT DATA - TM-5-4310-376-140022
FUNCTIONAL OVERVIEW
COMPONENT DESCRIPTIONS
UNLOADING CONTROL VALVE
Chapter 2. OPERATING INSTRUCTIONS - TM-5-4310-376-140027
Figure 2-1. Operator's Controls and lndicators
Section II. OPERATOR'S PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - TM-5-4310-376-140029
PREVENTIVE MAINTENANCE CHECKS AND SERVICES PROCEDURE
Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS)
Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS) - Continued - TM-5-4310-376-140032
Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS) - Continued - TM-5-4310-376-140033
Table 2-1. Operator Preventive Maintenance Checks and Services (PMCS) - Continued - TM-5-4310-376-140034
Section III. OPERATION UNDER USUAL CONDITIONS - TM-5-4310-376-140035
OPERATING PROCEDURE - TM-5-4310-376-140036
Figure 2-2. Compressor Decals
Section IV. OPERATION UNDER UNUSUAL CONDITIONS - TM-5-4310-376-140038
OPERATION IN UNUSUAL WEATHER
OPERATION UNDER OTHER CONDITIONS
Chapter 3. OPERATOR'S MAINTENANCE INSTRUCTIONS - TM-5-4310-376-140041
COMPRESSOR PUMP LUBRICATION
Section II. OPERATOR TROUBLESHOOTING
Table 3-1. Operator Troubleshooting
ENGINE STOPS SUDDENLY - TM-5-4310-376-140045
ENGINE DOES NOT STOP WHEN STOP SWITCH IS TURNED OFF
SERVICING - TM-5-4310-376-140047
Engine Air Cleaner - TM-5-4310-376-140048
CLEANING AND INSPECTION - TM-5-4310-376-140049
Fuel System - TM-5-4310-376-140050
Compressor Pump
Cleaning - TM-5-4310-376-140052
Chapter 4. ORGANIZATIONAL MAINTENANCE INSTRUCTIONS - TM-5-4310-376-140053
Section II. SERVICE UPON RECEIPT
CHECKING UNPACKED EQUIPMENT - TM-5-4310-376-140055
INSTALLATION INSTRUCTIONS
PREOPERATIONAL CHECKS AND SERVICES
Engine Lubrication - TM-5-4310-376-140058
Check Operation
Check Operation (cont)
Section III. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
Table 4-1. Organizational Preventive Maintenance Checks and Services - TM-5-4310-376-140062
FIGURE - TM-5-4310-376-140063
COMPRESSOR ASSEMBLY - TM-5-4310-376-140065
ENGINE ASSEMBLY - TM-5-4310-376-140066
ENGINE ASSEMBLY - Continued - TM-5-4310-376-140067
AIR RECEIVER SYSTEM
Section IV. ORGANIZATIONAL TROUBLESHOOTING
Table 4-2. Organizational Troubleshooting.
ENGINE IS HARD TO START OR FAILS TO START. - TM-5-4310-376-140071
ENGINE IS HARD TO START OR FAILS TO START. (cont)
ENGINE MISSES OR RUNS ERRATICALLY.
ENGINE KNOCKS OR LACKS POWER
ENGINE STOPS SUDDENLY - TM-5-4310-376-140075
NO PRESSURE IN AIR RECEIVER TANK.
EXCESSIVE OIL CONSUMPTION, COMPRESSOR PUMP OR ENGINE.
Section V. ORGANIZATIONAL MAINTENANCE PROCEDURES - TM-5-4310-376-140078
GUARD ASSEMBLY, BELT
GUARD ASSEMBLY, BELT - Continued
BELTS
REPLACING - TM-5-4310-376-140082
PULLEY AND HUB
REPLACING - TM-5-4310-376-140084
FUEL TANK LINES AND FITTINGS
REMOVAL - TM-5-4310-376-140086
FUEL TANK - TM-5-4310-376-140087
UNLOADER ASSEMBLY - TM-5-4310-376-140088
ADJUSTMENT - TM-5-4310-376-140089
UNLOADER ASSEMBLY - TM-5-4310-376-140091
REPLACING - TM-5-4310-376-140092
ADJUSTMENT - TM-5-4310-376-140093
ADJUSTMENT (CONT) - TM-5-4310-376-140094
LINES AND FITTINGS, COMPRESSOR
REPLACING - TM-5-4310-376-140096
PNEUMATIC CYLINDER (AIR CYLINDER)
REPLACING - TM-5-4310-376-140098
COMPRESSOR ASSEMBLY - TM-5-4310-376-140099
REPLACING - TM-5-4310-376-140100
COMPRESSOR CYLINDER HEADS
HIGH PRESSURE HEAD
LOW PRESSURE HEAD and HIGH PRESSURE HEAD
TASK SUMMARY FOR: Engine Assembly - TM-5-4310-376-140104
ENGINE ASSEMBLY - TM-5-4310-376-140105
SERVICING - TM-5-4310-376-140106
ENGINE ASSEMBLY - Continued - TM-5-4310-376-140107
FUEL FILTER
REPLACING - TM-5-4310-376-140109
AIR CLEANER - TM-5-4310-376-140110
REPAIR - TM-5-4310-376-140111
FILLER TUBE, LUBRICATION SYSTEM
Oil filler tube
FUEL PUMP, LINES AND FITTINGS
REPLACING - TM-5-4310-376-140115
CARBURETOR - TM-5-4310-376-140116
ADJUSTMENT - TM-5-4310-376-140117
ADJUSTMENT (CONT) - TM-5-4310-376-140118
EXHAUST SYSTEM
Muffler
STARTER, CLUTCH, AND BLOWER HOUSING. - TM-5-4310-376-140121
FIGURE - TM-5-4310-376-140122
Cleaning - TM-5-4310-376-140123
Installation. - TM-5-4310-376-140124
MAGNETO AND STOP SWITCH
ADJUSTMENT - TM-5-4310-376-140126
FLYWHEEL - TM-5-4310-376-140127
GOVERNOR - TM-5-4310-376-140129
ADJUSTMENT - TM-5-4310-376-140130
REPLACING - TM-5-4310-376-140131
CYLINDER HEAD (ENGINE)
REPLACING - TM-5-4310-376-140133
INFLATOR GAGE, AIR HOSE AND GLOBE VALVE
REPLACING - TM-5-4310-376-140135
PRESSURE GAGE, SAFETY VALVE AND DRAIN COCK
REPLACING - TM-5-4310-376-140137
AIR TANK - TM-5-4310-376-140138
REMOVAL - TM-5-4310-376-140139
REPLACING - TM-5-4310-376-140140
Section VI. PREPARATION FOR STORAGE OR SHIPMENT - TM-5-4310-376-140141
TYPES OF STORAGE
CHAPTER 5. DIRECT SUPPORT MAINTENANCE INSTRUCTIONS - TM-5-4310-376-140143
Table 5-1. Direct Support Troubleshooting
ENGINE IS HARD TO START OR FAILS TO START. - TM-5-4310-376-140145
ENGINE STOPS SUDDENLY - TM-5-4310-376-140146
COMPRESSOR FAILS TO BUILD UP PRESSURE, OR OIL IN DISCHARGE AIR
Section II. DIRECT SUPPORT MAINTENANCE PROCEDURES
FLYWHEEL, COMPRESSOR
REPLACING - TM-5-4310-376-140150
INTERCOOLER TUBE - TM-5-4310-376-140151
REPLACING - TM-5-4310-376-140152
COMPRESSOR CYLINDERS, BREATHER TUBE AND PISTONS
Low Pressure and High pressure cylinders
REPLACING - TM-5-4310-376-140155
Installing piston on connecting rod
COMPRESSOR CONNECTING RODS, PISTONS AND CRANKCASE - Continued
COMPRESSOR PISTON RINGS
REPLACING - RINGS
FIGURE - TM-5-4310-376-140160
COMPRESSOR CRANKSHAFT, BUSHING AND OIL SEAL
REPLACING - TM-5-4310-376-140162
COMPRESSOR CRANKSHAFT, BUSHING AND OIL SEAL - Continued
TASK SUMMARY FOR: Engine Assembly - TM-5-4310-376-140164
Page Deleted
BREATHER AND INTAKE MANIFOLD
REPLACING - TM-5-4310-376-140168
VALVES AND SPRINGS
REMOVAL - TM-5-4310-376-140170
INSTALLATION - TM-5-4310-376-140171
ADJUSTMENT - TM-5-4310-376-140172
PISTON AND ROD ASSEMBLY
INSTALLATION - TM-5-4310-376-140174
INSTALLATION (Cont'd) - TM-5-4310-376-140175
INSTALLATION (Cont'd) - TM-5-4310-376-140176
CAMSHAFT AND TAPPETS - TM-5-4310-376-140177
REPLACING - TM-5-4310-376-140178
REPLACING (CONT)
CRANKCASE AND OIL SEALS
CRANKCASE AND OIL SEALS - Continued
Table 5-2. Direct Support Maintenance Specifications
CHAPTER 6. GENERAL SUPPORT MAINTENANCE INSTRUCTIONS - TM-5-4310-376-140183
ENGINE ASSEMBLY - TM-5-4310-376-140184
OVERHAUL - TM-5-4310-376-140185
OVERHAUL - Continued - TM-5-4310-376-140186
OVERHAUL - Continued - TM-5-4310-376-140187
COMPRESSOR ASSEMBLY - TM-5-4310-376-140188
AIR COMPRESSOR ASSEMBLY OVERHAUL
APPENDIX A. REFERENCES - TM-5-4310-376-140191
APPENDIX B. MAINTENANCE ALLOCATION - TM-5-4310-376-140193
COLUMN ENTRIES - TM-5-4310-376-140194
EXPLANATION OF COLUMNS lN TOOL AND TEST EQUIPMENT REQUIREMENTS, Section Ill.
Section Il. MAINTENANCE ALLOCATION CHART - TM-5-4310-376-140196
Section Il. MAINTENANCE ALLOCATION CHART (CONT) - TM-5-4310-376-140197
Section Il. MAINTENANCE ALLOCATION CHART (CONT) - TM-5-4310-376-140198
Section Ill. TOOL AND TEST EQUIPMENT REQUIREMENTS - TM-5-4310-376-140199
APPENDIX C. COMPONENTS OF END lTEM AND BASIC ISSUE lTEMS LIST
Section Il. COMPONENTS OF END ITEM - TM-5-4310-376-140202
SECTION Ill. BASIC ISSUE lTEMS
APPENDIX D. ADDITIONAL AUTHORIZATION LIST - TM-5-4310-376-140205
BALNK PAGE - TM-5-4310-376-140206
APPENDIX E. EXPENDABLE SUPPLIES AND MATERIALS LIST - TM-5-4310-376-140207
SECTION II. EXPENDABLE SUPPLIES AND MATERIALS LIST - TM-5-4310-376-140208
APPENDIX F. ILLUSTRATED LIST OF MANUFACTURED lTEMS
APPENDIX G. TORQUE VALUES
GLOSSARY - TM-5-4310-376-140213
TM-5-4310-376-14 Compressor Reciprocating Gasoline Engine Driven 15 CFM 175 PSI Model 50-6840 Manual

Western Governors University

Privacy Statement
Press Release
Contact

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business