TM 5-4310-376-14
5-8. COMPRESSOR CRANKSHAFT, BUSHING AND OIL SEAL - Continued
REMARKS
ACTION
LOCATION/lTEM
1 . Crankshaft, h. Continued -
outside diameter of oil seal with shellac
bushing and
or pipe compound.
oil seal
(cont'd)
i. Press oil seal into crankshaft end cover (3)
with a vise or press. (If vise is used, protect
parts from damage by padding vise jaws.)
Protect lip of oil seal (5) from cutting on crankshaft by
wrapping a sheet of 0.003 inch brass shim stock around
shaft.
J Install new bushing (1) on crankshaft (2).
k. Install crankpin cap (9) with capscrews (10).
Safety wire capscrews (10).
l . Install shaft end cover (3) and new gasket (4).
m. Install access cover (7).
n. Install flywheel (8).
5-21