TM 5-4310-376-14
5-12. PISTON AND ROD ASSEMBLY - Continued
REMARKS
LOCATION/lTEM
ACTION
INSTALLATION (Cont'd)
3. Piston (cont'd) d. Install rod cap on connecting rod
and secure with two capscrews.
Torque capscrews to 190 inch-
pounds. Tighten rod screws secure-
ly. After tightening, rod should be
able to move sideways on journal.
e. Rotate crankshaft two revolutions
to be sure rod is correctly installed.
If rod strikes, installation is wrong,
or cam gear timing is out.
f. Bend screw locks against screw
heads.
g. Install crankcase cover (para 5-15).
h. Install cylinder head (para 4-33).
5-34
