TM 5-4310-378-14
Table 2-2. Operator Preventive Maintenance Checks and Services (Continued)
QQuarterly
MMonthly
WWeekly
A--After
D--During
B--Before
EQUIPMENT IS NOT
L
ITEM TO BE INSPECTED
READY/AVAILABLE IF:
PROCEDURE
No.
10
Cleaners. Clean the air cleaners as
Remove wing nut (1), washer (2), and cover
3). Remove filter (4) and screen (5). Clean filter (4)
screen (5) in a solution of mild soap and water.
thoroughly and allow to dry. Wipe the cover
3) and body (6) clean with a clean cloth. Install
(5), filter (4), cover (3), washer (2), and wing
(l).
6
Engine Air Cleaner. Take off cover (1) by pulling
11
and outward at clip (2). Remove element (3)
retainer (4). Wipe all metal parts clean and
wash element in a solution of mild soap and water.
Wrap element in clean toweling and squeeze dry.
Soak element in kerosene (Appendix E, item 8),
then squeeze out excess kerosene. Install retainer
[4) and element (3) then cover (l). Make certain clip
is engaged.
Change 1 2-7
