TM 5-4310-378-14
(27) Install second stage connecting rod and piston assembly (17), connecting rod cap (18), and secure
with two bolts (19). Be sure that cap is installed in the original position.
(28) Install first stage connecting rod and piston assembly (20), connecting rod cap (21), and secure with
two bolts (22). Be sure that cap is installed in the original position. Repeat for the other first stage
connecting rod and piston assembly,
(29) Install new gasket (23) into position.
(30) Carefully install cylinder (24) over connecting rod and piston assembly. Secure with eight copper
washers (25) and four bolts (26).
(31 ) Install gasket (27) into position.
Change 3 5 - 7
