TM 5-4310-379-14
4-14.
Oil Pan.
This task covers:
a.
Replace
INITIAL SETUP
Tools
Materials/Parts
General Mechanic's Tool Kit (NSN 5180-00-177-7033)
Oil Pan
Wrench, Torque (NSN 5120-00-554-7292)
Gasket, Oil Pan Mounting
Rags, Wiping (Item 21, Appendix D)
Lubricating Oil (Item 18, Appendix D)
Replace.
(figure 4-11)
(1) Remove drain plug (1) and drain oil into suitable container.
(2) Remove 20 screws (2), two clips (3), and remove oil pan (4) and gasket (5).
(3) Ensure all gasket surfaces are clean and free of old gasket material.
(4) Install oil pan (4) and gasket (5) and secure with 20 screws (2) and two clips (3). Torque screws to 13-17 Ib-ft
(18-23 Nm).
(5) Install drain plug (1).
(6) Add oil and bring oil to proper level on dipstick.
4-30
