TM 5-4310-379-14
4-18. Oil Cooler By-Pass Valve.
This task covers:
a.
Repair
INITIAL SETUP
Tools
Materials/Parts
General Mechanic's Tool Kit (NSN 5180-00-177-7033)
Oil Cooler By-Pass Valve
Wrench, Torque (NSN 5120-00-554-7292)
Gasket, Oil Cooler By-Pass Valve Mounting
Replace. (figure 4-16)
(1)
Remove two screws (1) and lockwashers (2), and remove oil cooler by-pass valve (3) and gasket (4).
(2)
Ensure all gasket surfaces are clean and old gasket material is removed.
(3)
Install oil cooler by-pass valve (3) and gasket (4) and secure with two screws (1) and lockwashers (2). Torque
screws to 46-50 Ib-ft (62-68 Nm).
4-40
