TM 5-4310-379-14
4-23. Clutch Assembly (Cont).
b.
Install. (figure 4-30)
(1)
Install yoke (17), shaft (15), two keys (16) and secure with two screws (13) and lockwashers (14).
(2)
Install handle (12) and tighten screw (11).
(3)
Install clutch assembly (10) and secure with lockwasher (8) and nut (9) and bend up lockwasher (8).
(4)
Install three clutch discs (4) in clutch assembly (10) and install drive ring (20) on clutch assembly (10).
(5)
Center drive ring (20) on clutch assembly (10) and engage clutch and remove drive ring (10).
(6)
Install drive ring (20) and secure with eight screws (18) and lockwashers (19).
(7)
Install grease line (7) and tighten two fitting nuts (6).
(8)
Install pilot bearing (5).
(9)
Install PTO housing (1) and secure with 12 screws (2) and lockwashers (3).
FOLLOW-ON MAINTENANCE
Install drive belts (para. 3-12).
4-72