TM 5-4310-379-14
(7)
Position intercooler (10) and two gaskets (19) on cylinder head (11) and secure with ten screws (7),
lockwashers (8), and four brackets (9). Torque screws to 30 Ib-ft (40 Nm).
(8)
Install screw (17) and washer (18) in each cylinder head securing intercooler. Torque screws to 30 Ib-ft (40
Nm).
(9)
Install two screws (12), lockwashers (13), washers (14), and spacers (15) securing intercooler sleeve
assembly (16).
(10)
Install pulley key (5) in keyway of crankshaft (6) and install pulley (4).
(11)
Install two pulley hub clamp bolts (3), washers (2), and nuts (1) on pulley and secure.
(12)
Air compressor installed, refer to para. 4-24.
(13)
Shroud installed, refer to para. 4-29.
FOLLOW-ON MAINTENANCE
(1) Air compressor assembly installed (para. 4-24).
(2) Shroud installed (para. 4-29).
Change 5-117
