TM 5-4310-380-13
4-2. AIR COMPRESSOR-Continued.
(1)
Remove four nuts (1), four lockwashers (2), cylinder (3), and gasket (4). Discard gasket. Repeat for
other two cylinders.
(2)
Remove two bolts (5), two lockwashers (6), connecting rod cap (7), and rod and piston assembly (8).
(3)
Remove bolt (9), washer (10), and slinger (11). Repeat for other two pistons.
(4)
Remove six bolts (12), six copper washers (13), insert two bolts in jack screw holes in cover (14),
tighten bolts and remove cover (14). Remove seal (15). Discard seal (15).
(5)
Remove gasket (16) and discard gasket (16).
Figure 4-1. Air Compressor, Disassembly.
GO TO NEXT PAGE
4-8
