TM 5-4310-380-13
4-2. AIR COMPRESSOR-Continued.
NOTE
Apply piping compound (Appendix E, item 7) to nipple (34) and plug (32).
(1)
Install nipple (34) into compressor base (35).
(2)
Install elbow (33) and plug (32) on nipple (34).
(3)
Install gage (31), new seal (30), cover (29), and four screws (28).
(4)
Install baffle (27), new gasket (26), cover (25), and secure with four washers (24), and four bolts (23).
(5)
Install bearing (22), counterweight (21), washer (20), and bolt (19).
(6)
Install bearing (17) on crankshaft (18).
(7)
Install new gasket (16), new seal (15), cover (14), six washers (13), and six bolts (12).
(8)
Install slinger (11), washer (10), and bolt (9).
(9)
Install rod and piston assembly (8), connecting rod cap (7), two washers (6), and two bolts (5). Torque
per Appendix F.
(10) Install new gasket (4), cylinder (3), four washers (2), and four nuts (1). Repeat for other two cylinders.
Torque per Appendix F.
(11) Install pulley per paragraph 3-19e.
(12) Install cylinder heads per paragraph 4-3f.
GO TO NEXT PAGE
4-12
