TM 5-4310-382-13
3-15. BELT GUARD ASSEMBLY.
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Repair
e. Installation
INITIAL SETUP
Tools Required
Tool Kit, General Mechanic's
Materials Required
Brush, Medium Bristle (item 4, Appendix E)
Solvent, Dry Cleaning (item 2, Appendix E)
Cloth, Lint-Free (item 3, Appendix E)
Equipment Condition
Engine shut down and cool.
a. Removal.
(1) Remove screw (1) and lockwasher (2) from upper belt guard (3).
(2) Remove four screws (4), four clip nuts (14), and belt guard (3).
(3) Remove four screws (7), eight washers (6), four lockwashers (12),four nuts (13), and bottom of belt guard (5).
(4) Remove two screws (11), two washers (10), two lockwashers (9),and two brackets (8).
3-22
