TM 5-4310-382-13
3-15. BELT GUARD ASSEMBLY - Continued.
d. Repair.
(1) Straighten any portion of the screen on belt guard which may be deformed.
(2) Replace any parts found defective during inspection.
e. Installation.
(1) Install two brackets (8), two lockwashers (9), two washers (10), and two screws (11).
(2) Install bottom of belt guard (5), four nuts (13), four lockwashers (12), eight washers (6), and four screws (7).
(3) Install belt guard (3), four screws (4), and four clips (14).
(4) Install lockwasher (2) and screw (1) into upper belt guard (3).
Figure 3-4. Belt Guard Assembly, Installation.
3-24
