3-16. BELTS, V, MATCHED SET AND GUIDE.
This task covers:
Tool Kit, General Mechanic's
Engine shut down and cool.
Belt guard assembly removed (except for bottom part of belt guard (see para 3-15).
(1) Loosen three knobs (8).
(2) Rotate take-up bolt assembly knob (7) counterclockwise until belts (6) are loose.
(3) Remove two belts (6) from drive pulley (5) and compressor pulley (1).
(4) Remove two bolts (4), two washers (3), and guide (2).
Figure 3-5. Belts, V, Matched Set and Guide, Removal.