TM 5-4310-382-13
3-18. TAKE-UP BOLT ASSEMBLY.
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Installation
INITIAL SETUP
Tools Required
Tool Kit, General Mechanic's
Materials Required
Brush, Medium Bristle (item 4, Appendix E)
Solvent, Dry Cleaning (item 2, Appendix E)
Cloth, Lint-Free (item 3, Appendix E)
Equipment Condition
Engine shut down and cool.
Drive belts removed (see para 3-16).
Fuel tank, lines, filter and fittings removed (see para 3-14).
a. Removal.
(1) Remove pin (3).
(2) Remove bolt (1) and lockwasher (7).
(3) Unscrew and remove bolt assembly (4), two washers (2), and block (5).
Figure 3-9. Take-Up Bolt Assembly, Removal.
3-30
