TM 5-4310-384-13SECTION III. SERVICE UPON RECEIPT OF EQUIPMENT3-7. SITE AND SHELTER REQUIREMENT.a.The compressor was designed to operate in a sheltered environment. Protect the compressor from water,excessive dirt and corrosive atmospheres.b.Compressor must be located in a clean, well ventilated dry place where compressor receives an adequate supplyof fresh, clean, cool and dry air. Allow sufficient space around the compressor so that it is accessible from all sides formaintenance.c.Locate the compressor where appropriate single phase electrical power with a separate ON/OFF switch may beinstalled.d.For proper cooling, insure that no object will obstruct the flow of air through the slotted belt guard to the fanbladed flywheel.e.Compressor requires a space approximately 6' x 2' (2 m x .6 m).3-8. SERVICE UPON RECEIPT OF MATERIAL.CAUTIONThe compressor is shipped without oil in the crankcase. Operating compressor without oil will destroy the compressorunit.Service Upon Receipt3-3
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
