TM 5-4310-385-13
3-20. MOTOR STARTER. This task covers:
a. Initial Setup.
c. Cleaning and Inspection.
b. Disassembly.
d. Reassembly.
INITIAL SETUP
a.
Tools. General Mechanic Auto; T1 5180-00-177-7033.
b.
Materials/Parts. Compressed Air; Wiping rag.
c.
Equipment Condition. Main power disconnected; Compressor Unit OFF; Motor Starter Removed
(paragraph 3-19).
d.
General Safety Requirements.
WARNING
·
Observe all Warnings and Cautions.
·
Never wear loose Clothing or jewelry while inspecting or servicing equipment.
·
Beware of rotating shafts, pulleys and fans which could entrap personnel and
cause serious injury.
DISASSEMBLY
WARNING
Be sure main power is disconnected and tagged before doing any work on
electrical systems. Voltages present in this equipment can cause injury or death.
a.
Tag and remove wires from coil terminal W (1) and terminal screw L2 (2).
b.
Remove starter assembly from enclosure. Refer to paragraph 3-19.
c.
Remove screws (3) that retain cover (4). Remove cover.
3-15
