TM 5-4310-385-13
Electric Motor
REMOVAL.
a.
Disconnect main power and turn compressor switch OFF.
b.
Remove the belt guard (1). Refer to paragraph 3-23.
c.
Loosen four mounting bolts, washers, nuts (2).
d.
Slide motor (3) towards compressor unit and remove V-belts (4).
e.
Remove drive pulley (5). Refer to paragraph 3-25.
f.
Remove screws (6) and cover plate (7) on motor conduit box (8).
g.
Tag and disconnect motor leads (T1, T2, T3) in conduit box.
h.
Remove conduit locknut and remove conduit (9) and wires (10) from box (8).
i.
Remove four mounting bolts, washers, and nuts (2).
j.
Lift electric motor (3) off tank saddle.
3-40