TM 5-4310-385-13
INSTALLATION.
a.
Position electric motor (3) on tank saddle.
b.
Install, but do not tighten, mounting bolts, washers and nuts (2)
c.
Route conduit (9) and wires (10) into box (8) and secure with locknut.
d.
Connect motor leads (T1, T2, T3) in conduit box.
e.
Install cover plate (7) and screws (6) on conduit box (8).
f.
Install drive pulley and check alignment. Refer to paragraph 3-25.
g.
Install V-belts and adjust belt tension. Refer to paragraph 3-24.
h.
Tighten mounting hardware (2).
i.
Install the belt guard. Refer to paragraph 3-23.
j.
Reconnect main power.
3-41
