TM 5-4310-385-13
ASSEMBLY.
a.
Install conduit box lid gasket (12), and lid (11 ) and secure with screws (10).
b.
Install thrust washer (9) in rear endplate (8).
c.
Install rear endplate (8).
NOTE
Bearings should be immersed in mineral oil heated to a temperature of 6000
Fahrenheit prior to installing.
d.
Press bearings (6) onto rotor assembly (4).
e.
Install rotor assembly (4).
f.
Install bearing guards (5) into front endplate (3) if any were removed.
g.
Install front endplate (3).
h.Install thru bolts (1) and nuts (2). Tighten nuts.
i.
Install electric motor onto tank frame. Refer to paragraph 3-33.
4-13 (4-14/Blank)
