TM 5-4310-386-14
4-45. Battery, Cover, and Cables (Cont).
b. Replace. (figure 4-59)
(1)
Unlatch two latches (1) and remove cover (2).
(2)
Remove two nuts (3), lockwashers (4), and remove battery holddown (5).
(3)
Loosen nut (6) and remove terminal (7).
(4)
Loosen nut (8) and remove terminal (9).
WARNING
Lead acid batteries contain a strong acid. This acid can cause severe skin burns.
Handle battery only with proper lifting strap. Wear protective clothing and eye
protection.
(5)
Remove battery (10).
(6)
Inspect cables on batteries and replace if insulation is cracked or burnt or cables are otherwise damaged.
(7)
Install battery (10).
(8)
Install cable (9) and tighten nut (8).
(9)
Install cable (7) and tighten nut (6).
(10)
Install battery holddown (5) and secure with two lockwashers (4) and nuts (3).
(11)
Install cover (2) and secure with two latches (1).
4-144
