TM 5-4310-386-14
5-36. Flywheel Housing Assembly .
This task covers:
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Shutdown device removed (para. 4-46).
Starter removed (para. 4-47).
Materials/Parts
Rear engine mount removed (para. 4-53).
Remove clutch assembly (para. 5-48).
Flywheel Housing Assembly
Replace.
(figure 5-54)
(1)
Remove bolt (1) and lockwasher (2).
(2)
Remove two bolts (3) and lockwashers (4).,
(3)
Remove nut (5) and lockwasher (6).
(4)
Remove four nuts (7).
(5)
Remove housing (8) from engine studs (9).
(6)
Install housing (8) on engine studs (9).
(7)
Install four nuts (7).
(8)
Install lockwasher (6) and nut (5).
(9)
Install two lockwashers (4) and bolts (3).
(10)
Install lockwasher (2) and bolt (1).
FOLLOW-ON MAINTENANCE
(1)
Install rear engine mount (para. 4-53).
(2)
Install starter (para. 4-47).
(3)
Install clutch assembly (para. 5-48).
(4)
Install shutdown device (para. 4-46).
5-154
