TM 5-4310-386-14
5-37. Rear Cover.
This task covers:
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Flywheel and ring gear removed (para. 5-35).
Starter removed (para. 4-47).
Materials/Parts
Rear Cover
Replace.
(figure 5-55)
(1)
Remove two bolts (1) and lockwashers (2).
(2)
Remove four bolts (3) and lockwashers (4).
(3)
Remove two bolts (5) and lockwashers (6).
(4)
Remove rear cover (7) from engine (8).
(5)
Install rear cover (7) on engine (8).
(6)
Install two lockwashers (6) and bolts (5).
(7)
Install four lockwashers (4) and bolts (3).
(8)
Install two lockwashers (2) and bolt (1).
FOLLOW-ON MAINTENANCE
(1)
Install flywheel and ring gear (para. 5-35).
(2)
Install starter (para. 4-47).
5-156
