TM 5-4310-386-14
6-21. Power Take-Off Assembly.
This task covers:
Repair
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Power take-off removed (para. 5-47).
Materials/Parts
Reference
Solvent, dry cleaning (Item 24, Appendix E)
Refer to Appendix F for torque values.
Rags, Wiping (Item 21, Appendix E)
Repair. (figure 6-27)
(1)
Remove grease fitting (1), jam nut (2), and lockwasher (3).
(2)
Remove fitting (4) from clutch assembly (5).
(3)
Remove fitting (4) and (6) from flexible hose (7).
(4)
Remove driving ring (8), pilot bearing (9), nut (10), and lockwasher (11) and remove clutch assembly (5).
(5)
Remove four screws (12), lockwashers (13), and bearing retainer (14).
(6)
Remove snap ring (15) and shaft clutch ball bearing (16) from clutch shaft (17).
(7)
Remove two keys (18) and fitting (19) from clutch shaft (17).
(8)
Remove two bolts (20), lockwasher (21) from throwout yoke (22).
(9)
Remove screw (23) from hand lever (24) and remove lever.
(10)
Remove two woodruff keys (25) from shaft (26) and remove shaft.
(11)
Remove two screws (27) and remove cover (28).
(12)
Remove grease fitting (29) and two fittings (30) from housing (31).
WARNING
Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive
heat. Flash point of solvent is 138oF (60oC).
6-64
