TM 5-4310-386-14
6-18. Clutch Assembly (Cont).
(12)
Inspect sliding sleeve (8) and split collar (3) mating surfaces and replace if either piece is cracked, shows
excessive wear, or are otherwise damaged.
(13)
Inspect all other items and replace all items that are worn or otherwise damaged.
(14)
Install six release springs (18) and hub-and-back plate pin (17) on hub-and-back plate (19).
(15)
Install driving split plates (16) and floating plate (15) on hub-and-back plate (19).
(16)
Install adjusting yoke (14), four finger levers (13), finger lever pins (12), and cotter pins (11).
(17)
Install adjusting lock pin spring (10) and adjusting lock pin (9).
(18)
Install sliding sleeve (8), eight lever links (7), lever link pins (6), and cotter pins (5).
(19)
Install two spacers (4), split collar (3), and secure with two bolts (2) and nuts (1).
FOLLOW-ON MAINTENANCE
Install clutch assembly (para. 5-48).
6-70
