TM 5-4310-386-14
(13)
Clean all parts with dry cleaning solvent, and dry thoroughly.
(14)
Inspect yoke (22) and replace if cracked, worn, or otherwise damaged.
(15)
Inspect shaft (26) and replace if bent, worn, or otherwise damaged.
(16)
Inspect clutch shaft (17) and replace if bent, worn, threads are stripped, keyway groove is worn, or shaft
(17) is otherwise damaged.
(17)
Inspect pilot bearing (9) and clutch ball bearing (16), and replace if worn, scored, or otherwise damaged.
(18)
Install two fittings (30) and fitting (29) on housing (31).
(19)
Install cover (28) and secure with two screws (27).
(20)
Install shaft (26) and two woodruff keys (25).
(21)
Install hand lever (24) and secure with screw (23).
(22)
Install throwout yoke (22) and secure with two lockwashers (21) and bolts (20).
(23)
Install fitting (19) in clutch shaft (17), and two keys (18).
(24)
Install clutch ball bearing (16) on shaft (17) and secure with snap ring (15).
(25)
Install bearing retainer (14) and secure with four screws (12) and lockwashers (13).
(26)
Install clutch assembly (5) on shaft (17).
(27)
Install lockwasher (11), nut (10), pilot bearing (9), and driving ring (8).
(28)
Install flexible hose (7) on fittings (6) and (4).
(29)
Install fitting (6) in housing (31) and install lockwashers (3), jam nut (2) and grease fitting (1).
(30)
Install fitting (4) on clutch assembly (5).
FOLLOW-ON MAINTENANCE
Install power take-off (para. 5-47).
6-67