4-31. Oil Filter Screen

Figure 4-31. Oil Filter Screen, Service.

TM-5-4310-387-14 Compressor Unit Diesel Engine Driven 20 CFM 3200 PSI Model K-20-D Manual
Page Navigation
100

TM 5-4310-387-14 4-31. Oil Filter Screen. This task covers: a. Service b. Replace INITIAL SETUP Tools Equipment Condition General Mechanic's Tool Kit (NSN 5180-00-177-7033) Compressor unit shutdown and depressurized (para. 2-12). Materials/Parts Rags, Wiping (Item 19, Appendix E Solvent, Dry Cleaning (Item 21, Appendix E) Brush (Item 6, Appendix E) Gasket a. Service. (figure 4-31) (1) Remove drain plug (1) and drain oil into suitable container. (2) Remove two nuts (2), oil screen (3), and gasket (4). Discard gasket (4). WARNING Dry cleaning solvent, PD-680 used to clean parts is potentially dangerous to personnel and property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive heat. Flash point of solvent is 138°F (60 °C). (3) Clean oil screen (3) with dry cleaning solvent and dry thoroughly. (4) Inspect oil screen (3) and replace if screen material is ripped or oil screen is otherwise damaged. (5) Install new gasket (4) and oil screen (3) and secure with two nuts (2). (6) Install oil drain plug (1). (7) Remove filler plug (5). (8) Fill engine with oil until oil level reaches full mark on dipstick (6). Refer to table 3-1 for proper grade viscosity of oil. (9) Install filler plug (5). 4-66

Privacy Statement
Press Release
Contact