TM 5-4310-387-14
4-31. Oil Filter Screen (Cont).
b. Replace. (figure 4-32)
(1)
Remove drain plug (1) and gasket (2), and drain engine oil into suitable container. Discard gasket (2).
(2)
Remove two nuts (3) and remove oil screen (4) and gasket (5). Discard gasket (5).
(3)
Ensure all gasket mounting surfaces are clean and free of old gasket material.
(4)
Install new gasket (5) and new oil screen (4) and secure with two nuts (3).
(5)
Install new gasket (2) on drain plug (1) and install drain plug (1).
(6)
Remove oil filler cap (6) and gasket (7).
(7)
Add oil to engine until oil level reaches full mark on dipstick (8). Refer to table 3-1 for proper grade
viscosity of oil.
(8)
Install oil filler cap (6).
4-68
