TM 5-4310-387-14
5-31. Compression Release Assembly..
This task covers:
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tools Kit (NSN 5180-00-177-7033)
Cylinder head removed (para. 5-29).
Materials/Parts
Preformed Packing
Gasket
Compression Release Mechanism
Replace. (figure 5-45)
(1)
Remove two push rods (1), push rod tube (2), and preformed packing (3). Discard preformed packing (3).
(2)
Remove two screws (4), compression release assembly (5), and gasket (6). Discard gasket (6).
(3)
Ensure all gasket mounting surfaces are clean and old gasket material removed.
(4)
Install new gasket (6) and compression release assembly (5) and secure with two screws (4).
(5)
Install new preformed packing (3), push rod tube (2) and two push rods (1).
5-100
