TM 5-4310-387-14
5-32. Gear Cover Assembly.
This task covers:
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tools Kit (NSN 5180-00-177-7033)
Speed control assembly removed (para. 5-30).
Pliers, Retaining Ring (NSN 5210-00-789-0492)
Compression release assembly removed
(para. 5-31).
Materials/Parts
Preformed Packing
Gear cover assembly
Replace. (figure 5-46)
(1)
Remove retaining ring (1).
(2)
Press camshaft (2) out of bearing (3) and remove preformed packing (4). Discard preformed packing (4).
(3)
Press bearing (3) out of gear cover (5).
(4)
Remove two studs (6) and dipstick (7).
(5)
Install dipstick (7) and two studs (6) in new gear cover (5).
(6)
Press bearing (5) into new gear cover (6).
(7)
Install new preformed packing (4) and press camshaft (2) into bearing (3) and install retaining ring (1).
5-102