TM 5-4310-387-14
6-18. Gear Cover Assembly (Cont).
(2)
Replace primer assembly. (figure 6-16)
(a)
Remove gear cover assembly (para. 5-32).
(b)
Pull off knob (1) and remove pin (2), spring (3), washer (4), and preformed packing (5). Discard
preformed packing (5).
(c)
Install new spring (3), washer (4), and new preformed packing (5) on pin (2).
(e)
Install gear cover assembly (para. 5-32).
6-48
