TM 5-4310-387-14
4-25. Fuel Tank.
This task covers:
a.
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit (NSN 5180-00-177-7033)
Compressor unit shutdown and depressurized
(para. 2-12).
Materials/Parts
Fuel Tank
Fuel Diesel (Item 10, Appendix E)
Replace. (figure 4-22)
(1)
Drain fuel from tank (1).
(2)
Loosen nut (2) and remove clamp (3) and seam protector (4).
(3)
Loosen nut (5) and remove clamp (6) and seam protector (7).
(4)
Disconnect fuel line (8) from tank (1).
(5)
Remove banjo bolt (9), washer (10), fitting (11), and washer (12) and remove tank (1).
(6)
Remove edging (13) from tank (1).
(7)
Remove any protective pads stuck on tank (1).
(8)
Remove cap (14) and gasket (15) from tank (1).
(9)
Install edging (13) on new tank (1).
(10)
Install washer (12), fitting (11), washer (10) and secure with banjo bolt (9).
(11)
Connect fuel line (8) to fuel tank (1).
(12)
Ensure protective pads are positioned on engine.
(13)
Position fuel tank (1) on engine.
(14)
Install seam protector (7) and clamp (6).
(15)
Install seam protector (4) and clamp (3).
(16)
Tighten two nuts (5) and (2).
(17)
Replenish fuel supply.
(18)
Install cap (14) and gasket (15).
4-50
