TM 5-4310-387-14
4-26. Engine Air Cleaner Assembly (Cont).
b.
Replace. (figure 4-24)
(1)
Loosen connector nut (1) and disconnect line (2).
(2)
Remove atomizer (3) from air filter (4).
NOTE
The air filter is an oil bath model. Keep air filter upright to prevent oil spillage.
(3)
Remove two nuts (5), air filter (4), and gasket (6). Discard gasket (6).
(4)
Ensure gasket mounting surfaces are clean and old gasket material removed.
(5)
Install new gasket (6), air filter (4) and secure with two nuts (5).
(6)
Note orifice in atomizer (3).
(7)
Install atomizer (3) in air filter (4) ensure orifice is pointing directly at cylinder head (7).
(8)
Install line (2) and tighten connector nut (1).
(9)
Unsnap two clips (8) and remove cup (9) and gasket (10).
(10)
Fill cup (9) to "OIL" line with clean engine oil.
(11)
Install gasket (10) and cup (9) and secure with two clips (8).
4-54
