TM 5-4310-387-14
4-26. Engine Air Cleaner Assembly.
This task covers:
a.
Service
b.
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit (NSN 5180-00-177-7033)
Compressor unit shutdown and depressurized
(para. 2-12).
Materials/Parts
Air Cleaner Assembly
Oil, Lubricating (Item 16, Appendix E)
Rags, Wiping (Item 19, Appendix E)
Gasket
a.
Service. (figure 4-23)
(1)
Unsnap two clips (1) and remove cap (2) and gasket (3). Discard gasket (3).
(2)
Pour out oil from cup (2) into suitable container.
WARNING
Dry cleaning solvent, PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive
heat. Flash point of solvent is 138°F (60 °C).
(3)
Clean cup (2) with dry cleaning solvent and dry thoroughly.
(4)
Fill cup (2), with clean engine oil, to OIL line.
(5)
Inspect gasket (3) and replace if cracked.
(6)
Install new gasket (3) and cup (2) and secure with two clips (1).
4-52
