TM-5-4310-389-14
Figure 4-4. Valve Head, 1st Stage
7. Remove and discard valve gasket (10).
REPLACE REPAIR
1.
Install new valve (9) with gasket (10) and locate valve cap (8).
2.
Install valve cover (6) with new 0-ring (7) and fasten with self retaining nuts (4) and washers (5).
3.
Tighten retaining nuts to 33 lb-ft (45 Nm) torque. Install new gasket (3) over studs.
4.
Tighten stud (2) to 18 lb-ft using allen key and screw on cap nut (1).
4-28
