TM-5-4310-389-14
Figure 4-7. Valve Head Tightening Sequence
2.
Tighten nuts in accordance with Appendix F and figure 4-7.
1st Stage Intercooler (2, figure 4-8).
a. Removal.
1.
Remove intercooler tube from 1st stage head.
2.
Remove intercooler tube from 2nd stage head (at U-bent pipe).
3.
Remove the eight mounting brackets from the outer part of the intercooler ring.
4.
Remove intercooler.
b. Install.
1.
Place intercooler in place and loosely fit the mounting brackets in place.
2.
Finger-tighten both the 2nd stage head fitting and the 1st stage head fitting.
4-32
