TM-5-4310-389-14
1.
Remove the fitting on the 4th stage exhaust side.
2.
Remove fitting at the base of the block that connects the after cooler to the condensate drain.
3.
Remove five mounting brackets that hold the after cooler in place on the cooling ring.
4.
Remove 4th stage cooler carefully.
b. Install.
1.
Install cooler in place and finger-tighten fittings.
2.
Install mounting brackets and tighten.
3.
Tighten fittings.
4.
Reinstall flywheel/cooling fan (paragraph 4-9); reinstall belt guard (paragraph 3-16).
5.
Leak test.
4-36
