TM-5-4310-389-14
4-10 OIL LUBRICATING SYSTEM (COMPRESSOR).
DESCRIPTION
This task covers:
Replace,
Repair
INITIAL SETUP
Tools:
Equipment conditions:
General Mechanics Tool Kit
Equipment secured (paragraph 2-11).
Drain oil from system (paragraph 3-20,
Materials/parts:
figure 3-10).
Oil
Oil Container
Cloth, Lint-free, item 9 Appendix E
REPLACE REPAIR
WARNING
Cleanliness is imperative in maintaining and handling diving system components. An tools and parts
must be kept free of oil, grease, rust, or other contamination in accordance with accepted Army diving
cleaning procedures. Foreign substances within an assembly could result in equipment failure and
possible injury or death to personnel.
WARNING
Any break in air system integrity can cause contamination of the air system. Serious injury or death may
result due to air system contamination. Follow Army diving cleaning procedures to maintain air system
integrity.
a.
Lube oil pump. (Figure 4-10).
1.
Loosen tube connection (5) to separate oil supply tube from lube oil pump (6).
2.
Place suitable oil catch container beneath oil supply tube. Remove allen screws (4) and washers (3) that
secure oil pump to compressor.
4-39
