TM-5-4310-389-14
Figure 4-72. Separator Block (Sheet 2 of 2)
4.
Remove the two screws securing the condensate heater cover and slide towards the wing harness.
Remove the two wires taking note of their position for reassembly.
5.
Remove condensate block (22) from unit.
6.
Disassemble the vortex element (49) from the head.
7.
Remove the four bolts (48) that retain the flange for the final pressure safety valve (43).
8.
Remove the four allen head bolts (13) that secure the separator block to the base plate (1).
9.
Remove the intermediate pressure relief safety valve (42). Remove the four bolts from the base plate that
secure the intermediate separator housing in place. Remove the 0-ring (53) and the vortex element inside
the separator housing.
4-118
