TM-5-4310-389-14
2-18 OPERATION IN SALT WATER AREAS.
a.
Avoid direct contact with salt water to prevent corrosion. If salt water does come in contact with the unit, rinse the
unit with clean, fresh water.
b.
Repair any paint damage, such as cracks and chips. Apply standard issue rustproofing material to all exposed
ferrous metal (steel) surfaces. If rustproofing material is not available, apply a light film of oil or grease to all
exposed metal surfaces.
2-19 OPERATION AT HIGH ALTITUDES.
a.
Engine power output will decrease to about 3-1/2 percent for every 1000 feet above sea level. The compressor will
have a similar loss of operating efficiency.
b.
Service the engine/compressor air cleaner often to minimize this loss of efficiency.
2-23/(2-24 blank)
