TM 5 4310-451-14
4-38. ETHER START KIT REPLACEMENT (Con’t).
5.
Remove two screws (11), bracket (12), two nuts (13), and valve (4) from bracket (14).
6.
Remove two nuts (17), washers (16), screws (15), and bracket (14) from instrument panel (6).
b. INSTALLATION I
NOTE
If Installing cylinder only, perform steps 5 and 6.
1.
Install bracket (14) on instrument panel (6) with two screws (15), washers (16), and nuts (17).
2.
Position valve (4) on bracket (14) and Install bracket (12) with two nuts (13) and screws (11).
3.
Install elbow (10) and line (9) on valve (4).
4.
Install clamp (2) on Instrument panel (6) with two screws (5), washers (7), and nuts (8).
TA704737
4-59
