TM 5-4310-451-14
4-94. OIL SEPARATOR DRAIN VALVE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions
Materials/Parts:
System pressure relieved.
Sealing compound (Item 14, Appendix E)
Tools/Test Equipment:
Common no. 1 shop set
a. REMOVAL
NOTE
A suitable container should be used to catch any draining oil. Ensure that all spills are cleaned up.
1. Turn knob (5) counterclockwise and allow all oil to drain from oil separator (1).
2. Remove drain valve (4), nipple (3), and bushing (2) from oil separator (1).
TA704873
4-222