TM 5-4310-451-14
4-96. SAFETY RELIEF VALVE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
áSystem pressure relieved
áAntiseizing tape (Item 41, Appendix E)
Tools/Test Equipment:
áGeneral mechanic’s tool kit
áCommon no. 1 shop set
a. REMOVAL
1.
Remove pipe (5) from elbow (4).
2.
Remove elbow (4) and pipe (3) from safety relief valve (2).
3.
Remove safety relief valve (2) from oil separator (2).
b. INSTALLATION
1.
Apply antiseizing tape to threads of safety relief valve (2) and install safety relief valve on oil separator (1).
2.
Apply antiseizing tape to threads of pipe (3) and install pipe and elbow (4) on safety relief valve (2).
3.
Apply antiseizing tape to threads of pipe (5) and install pipe on elbow (4).
4-226
