TM 5-4310-451-14
4-95. AIR COMPRESSOR OIL STOP VALVE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions
Materials/Parts:
•
System pressure relieved.
•
Sealing compound (Item 14, Appendix E)
•
Bottom front panel removed (see paragraph 4-81).
Tools/Test Equipment:
•
General mechanic's tool kit
•
Common no. 1 shop set
a. REMOVAL
NOTE
A suitable container should be used to catch any draining oil. Ensure that all spills are cleaned up.
1. Remove hose (7) and adapter (8) from elbow (9).
2. Remove tube (4) and tube (6) from tee (5).
3. Remove elbow (9) and nipple (10) from oil stop valve (11).
4. Remove oil stop valve (11) from nipple (12).
5. Remove tee (5) from oil stop valve (11).
6. Remove nipple (12), elbow (3), and nipple (2) from air compressor (1).
b.
INSTALLATIONI
1. Apply sealing compound to threads of nipples (2 and 12).
2. Install nipple (2), elbow (3), and nipple (12) on air compressor (1).
3. Apply sealing compound to threads of tee (5) and install tee in oil stop valve (11).
4. Install oil stop valve (11) on nipple (12).
5. Apply sealing compound to threads of nipple (10) and install nipple and elbow (9) on oil stop valve (11).
6. Apply sealing compound to threads of tubes (4 and 6) and install tubes on tee (5).
7. Apply sealing compound to threads of adapter (8) and install adapter and hose (7) on elbow (9).
4-224
