TM 5-4310-451-14
5-30. INJECTOR TUBE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Cylinder head removed (see paragraph 5-28).
Materials/Parts:
Rocker arms removed (see paragraph 5-41).
Lubricating oil (Item 28, Appendix E)
Exhaust valve bridges removed (see paragraph
Dry cleaning solvent (Item 38, Appendix E)
5-26).
One preformed packing
Fuel injectors removed (see paragraph 5-57).
Exhaust valve removed (see paragraph 5-24).
Tools/Test Equipment:
Cam follower assemblies and pushrods removed
General mechanic's tool kit
(see paragraph 5-25).
Field automotive shop set
General Safety Instructions:
Injector set, J25521
Reconditioning set, J22525
Dry cleaning solvent Is flammable and must not be
used near open flame. Use only In a well-ventilated
area.
a. REMOVAL
NOTE
All Injector tubes are removed same way.
1. Insert injector tube installer (1) in injector tube (2).
TA704946
5-65