TM 5-4310-451-14
5-40. IDLER GEAR MAINTENANCE (Con’t).
24.
Install retainer (7) on idler gear (3) using six
screws (8). Torque screws to 29 lb.-ft. (39
Nom).
e. INSTALLATION
1.
Aline timing marks on camshaft gear (2) and
crankshaft gear (5) with idler gear (3).
2.
Install idler gear (3) in rear end plate (4) until
idler gear is fully meshed with camshaft gear (2)
and crankshaft gear (5).
3.
Rotate gear hub (11) until dowel in gear hub
alines with hole in rear end plate (4).
4.
Tap gear hub (11) until seated with rear end
plate (4).
5.
Ensure that timing marks on idler gear (3),
camshaft gear (2), and crankshaft gear (5) are
still alined.
5-143
