TM 5-4310-451-14
5-41. ROCKER ARM MAINTENANCE.
This Task Covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Rocker arm covers removed (see paragraph 4-29).
•
Lubricating oil (Item 31, Appendix E)
Tools/Test Equipment:
•
Dry cleaning solvent (Item 38, Appendix E)
• General mechanic’s tool kit
•
Marker tags (Item 40, Appendix E)
• Field automotive shop set
•
Tape (Item 43, Appendix E)
General Safety Instructions:
• Dry cleaning solvent is flammable and must not be used near open flame. Use only in a well-ventilated area.
a. REMOVAL
NOTE
All rocker arms are removed same way. This procedure covers one set of rocker arms.
1.
Turn nut (1) until three rocker arms (2) aline.
5-145
