TM 5-4310-451-14
5-47. ENGINE OIL COOLER REPLACEMENT (Con’t).
5.
Remove gasket (13) from oil cooler housing (12). Discard gasket.
6.
Remove oil cooler core (14) and gasket (15) from cover (16). Discard gasket.
b.
REPAIR
Repair oil cooler core in accordance with TM 750-254.
c.
INSTALLATION
1.
Install new gasket (15) on oil cooler core (14).
2.
Install new gasket (13) on oil cooler housing (12).
3.
Place flange (2) and new gasket (1) on oil cooler housing (12).
4.
Install oil cooler housing (12), gasket (13), oil cooler core (14), and gasket (15) on cover (16) with eight new
lockwashers (11) and bolts (10).
5.
Install flange (2) with two new lockwashers (3) and nuts (4).
6.
Install two new lockwashers (5) and screws (6).
7.
Position fuel line (7) and clamp (9) on oil cooler housing (12) and install screw (8).
FOLLOW-ON TASKS:
• Install oil cooler elbow (see paragraph 4-45).
5-161
