TM 5-4310-451-14
5-48. ENGINE OIL COOLER ADAPTER REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Oil cooler removed (see paragraph 5-47)
•
Marker tags (Item 40, Appendix E)
• One copper washer
Tools/Test Equipment:
•
One cpper washer
•·Three gaskets
• General mechanic's tool kit
•
Twelve lockwashers
• Field automotive shop set
a. REMOVAL
NOTE
Tag bolts as removed to assist In Installation.
1. Remove five bolts (5) and lockwashers (4). Discard lockwashers.
2. Remove five bolts (6) and lockwashers (7). Discard lockwashers.
3. Pry cover (3) and gasket (2) from oil cooler adapter (1). Discard gasket.
4. Remove bolt (15) and copper washer (16). Discard copper washer.
5. Remove two bolts (14), lockwashers (13), oil cooler adapter (1), and two shims (17). Discard lockwashers.
TA705037
5-162
