TM 5-4310-451-14
5-64. BLOWER ASSEMBLY REPAIR (Cont).
10.
Install two screws (28) and torque to 10 lb.-ft. (14 Nom).
11.
Apply lubricating oil (Item 28, Appendix E) to seals (40) and light coat of grease to rear end plate surface of blower
housing (1).
FRONT VIEW
12.
Check that dowel pins (41) In rear end plate (2) project 0.270 in. (6.858 mm).
13.
Aline rear end plate (2) with gaps of seals (40) facing top of blower housing (1).
14.
Aline rear end plate (2), seals (40), and dowel pins (41) with blower housing (1) and install rear end plate on
blower housing.
TA705097
5-226